AUDI 4G5807139 Bumper Wire Holding Bracket
fits model: A6, Quattro. make: Audi. year: 2012–2015.
( Manufacturer Part Number: 4G5807139 ), ( Type: Bumper Wire Holding Bracket ), ( Manufacturer Warranty: No Warranty ), ( Vintage Part: No ), ( Placement On Vehicle: Rear ), ( California Prop 65 Warning: Warning )
Review AUDI Bumper Wire Holding Bracket Oem fits QUATTRO A6 2012–2015
The **Audi 4G5807139 Bumper Wire Holding Bracket** is a precision-engineered replacement part designed specifically for the **2012 through 2015 Audi A6 Quattro models**, ensuring a seamless fit for vehicles equipped with the **4G5807139 bumper assembly**. This high-quality bracket serves as a critical component in securing the wiring harnesses and connectors that run through the front bumper, safeguarding against wear, vibration, and potential damage from road debris or impacts. Crafted from durable **stamped steel or reinforced plastic**, depending on the original specification, this bracket is built to withstand the rigorous demands of daily driving while maintaining structural integrity and electrical reliability.
The design of the **4G5807139 bracket** is optimized for easy installation, featuring **pre-aligned mounting holes** that align perfectly with the bumper s existing fastener points, eliminating the need for drilling or modification. Its robust construction prevents loosening over time, reducing the risk of wiring damage that could lead to electrical malfunctions, such as faulty sensors, headlight or taillight failures, or even airbag system disruptions. For Audi owners seeking to restore factory-level functionality or upgrade their bumper assembly, this bracket is an essential component that ensures both **aesthetic continuity** and **mechanical reliability**.
Whether replacing a worn-out original part or upgrading to a more durable aftermarket alternative, the **4G5807139 bumper wire holding bracket** is a straightforward yet vital upgrade. Its compatibility with the **Audi A6 Quattro s front bumper system** including models with optional **LED lighting or advanced driver-assistance features** makes it a must-have for those performing bumper replacements, repairs, or customizations. By maintaining proper wiring alignment and protection, this bracket contributes to the long-term performance and safety of the vehicle, ensuring that critical electrical systems remain operational under all driving conditions.
### Pros and Cons of buying a Audi 4G5807139 (2012 2015 A6 Quattro Bumper Wire Holding Bracket)
#### **Pros:**1. **Direct Fitment** This part is specifically designed for the 2012 2015 Audi A6 Quattro, ensuring compatibility without modifications. It will slot into place without requiring adjustments, reducing installation time and potential errors.
2. **Prevents Wire Damage** The bumper wire holding bracket secures the wiring harness that connects to the front bumper. Without this bracket, the wires could fray, corrode, or become disconnected over time, leading to electrical issues like malfunctioning sensors, lights, or even the horn.
3. **Cost-Effective Solution** Replacing a damaged or missing bracket is far cheaper than dealing with the potential consequences of wire failure, such as repairs to sensors, wiring harnesses, or even the bumper itself.
4. **Easy Installation** Most aftermarket brackets like this one are designed for straightforward installation, often requiring only basic tools (e.g., screwdrivers or sockets). No specialized equipment is usually needed.
5. **Prevents Long-Term Issues** Ignoring a broken bracket can lead to progressive wire damage, which may eventually require a full wiring harness replacement a far more expensive and labor-intensive repair.
6. **Availability** Since this is a common part for older Audi models, it is widely available from both OEM (Original Equipment Manufacturer) and aftermarket suppliers, ensuring easy sourcing.
---
#### **Cons:**1. **Potential Quality Variations** If purchasing from a non-OEM supplier, there may be inconsistencies in material quality or fit compared to the genuine Audi part. Some aftermarket brackets might be slightly less durable or prone to loosening over time.
2. **Rust or Corrosion Risk** If the original bracket was damaged due to rust or road salt exposure, a replacement may still be susceptible to corrosion in harsh environments unless treated with anti-corrosion coatings.
3. **Misalignment During Installation** If not installed correctly, the bracket could interfere with the bumper s movement (e.g., in case of minor impacts or adjustments) or fail to secure the wires properly, negating its purpose.
4. **Limited Longevity Compared to OEM** While aftermarket brackets are generally reliable, they may not last as long as an OEM part, especially in high-stress conditions or extreme climates.
5. **Possible Overlooked Damage** If the wires themselves are already damaged (e.g., frayed or corroded), replacing just the bracket won t fix the underlying issue. A thorough inspection of the wiring harness may be necessary.
6. **Counterfeit Parts Risk** When buying from untrusted sellers (especially online marketplaces), there s a risk of receiving a fake or low-quality part that doesn t meet Audi s specifications.
---
### **Conclusion:**The Audi 4G5807139 bumper wire holding bracket is a **practical and necessary replacement** for preventing wire-related electrical failures in your 2012 2015 A6 Quattro. The benefits of installing it such as avoiding costly sensor or wiring repairs far outweigh the minor risks, provided you source the part from a reputable supplier and ensure proper installation.
If you prioritize **durability and exact fit**, an OEM or high-quality aftermarket part is the best choice. If you re on a tight budget and the part is sourced carefully, an aftermarket bracket can still be a reliable solution.
---
### **Recommendation:**1. **Verify the Part Number** Double-check that the 4G5807139 is the correct part for your specific A6 Quattro model year and trim. Some variants may have slight differences in bracket design.
2. **Choose a Trusted Supplier** Purchase from Audi-approved dealers, reputable aftermarket brands (e.g., Mann Filter, Dorman, or local Audi specialty shops), or well-reviewed online retailers to avoid counterfeit parts.
3. **Inspect the Wiring Harness** Before installing the new bracket, examine the wires for signs of wear, corrosion, or damage. If the wires are compromised, consider replacing them alongside the bracket.
4. **Follow Installation Instructions Carefully** Ensure the bracket is securely fastened and properly aligned to avoid future issues. Refer to your vehicle s service manual or a trusted online guide if needed.
5. **Consider Preventative Maintenance** If your A6 is exposed to harsh conditions (e.g., salted roads, off-roading), apply anti-corrosion treatments to the bracket and wires to extend their lifespan.
**Final Verdict:** This is a **worthwhile and cost-effective repair** that should not be delayed if the bracket is damaged. Addressing it early will save you from more expensive electrical or structural problems down the line.
Details:
There is no holding of items unless agreed upon. 2012 AUDI A6 QUATTRO. Receipts are available upon request. First come first serve.
part #: 4g5807139 prices
- $293.53-$449.98
specifications frontbumperus:
- for models: A6, Quattro
- for makes: Audi
- for years: 2012-2015
- mpn: 4g5807139
- type: Bumper Wire Holding Bracket
- manufacturer warranty: No Warranty
- vintage part: No
- placement on vehicle: Rear
- california prop 65 warning: Warning
payments frontbumperus:
- other
- credit card: Diners-club
- wallet: Google-pay
offer frontbumperus:
- quantity: 1
- sold: 0
- availability: In Stock
- best offers: True
- started: May 15, 2026
- options: Ship-to-home
shipping frontbumperus:
- service: USPS Ground Advantage, UPS 2nd Day Air
- type: Fixed
- transit: 5-12 Days
- cost: $0.00
- class: Standard, Expedited
- carrier: USPS, UPS
seller frontbumperus:
- city: Morrisville, Pennsylvania
- # reviews: 2800
- rating: 99.4%
returns frontbumperus:
- paid by: Buyer
- policy: Returns Accepted
- time: 30 Days
general frontbumperus:
- condition: Used
- Exterior Parts Accessories > Bumpers Components > Bumpers Reincements
Audi 4G5807139 Is Similar To:
- 08aab8 Gtp For Audi Bumper Tow Hook License Plate Adapter Mount (27.7% similar) Make sure the threading pattern is same, regardless of tow bar color. Please feel free to and we'll process your request with 48 hours upon receipt...(March 9th, 2018)
- 102-8t0807233 Audi Oem Front Bumper Lower Filler Plate (33.1% similar) A5CO 2011 A5CA...(January 7th, 2019)
- 254948 Audi Front Bumper Fits 05-09 A4 105-59079b (31% similar) Con from vin, new design, excl. No expedited shipping is available. Original shipping charges and return shipping charges are not covered...(August 2nd, 2016)
- 13431173 Aftermarket Products Front Lh Bumper Cover For Audi Fog Lamp (36.8% similar) The items are brand new parts that look and fit same as original, except at a much better price...(July 4th, 2018)
- 13457269 Aftermarket Products Bumper Bracket For Audi Set Of Front Left (37.7% similar) The items are brand new parts that look and fit same as original, except at a much better price...(May 28th, 2018)
- 13830756 Aftermarket Products Front Bumper Cover For Audi Primed (36.6% similar) The items are brand new parts that look and fit same as original, except at a much better price...(September 20th, 2018)
- 8d5-807-363 1996-2001 Audi A4 Sedan Oem Rear Bumper Cover With Reinforcement Factory (34.4% similar) Does show minor scratches and wear all over because is used but nothing major,easy for fixing. IMP0RTANT info attention I need the winner's phone number for shipping with greyhound. All of the mounting tabs are intact and good. Come with the metal reinforcement too. Will need to be sanded down and ...(February 21st, 2016)
- Audi 2005 Grey 2004 Front Bumper S4 2003 Price Prices Drop Primered (42.6% similar) Fits audi 2003 , 2004 , 2005 a4 S4. Brand new audi a4 s4 front bumper. This unit has the washer holes for the headlights. Primer grey ready for your custom paint color...(November 6th, 2014)
- Reinforcement Driver Prices Extension Audi 2004 Front Bracket Left 9 A8 D3 Support (29.5% similar) Items may show light scuffs, scratches or other imperfections as a result of this being a used part. Address available upon request...(February 8th, 2015)
- 2007 Prices Volkswagen Audi 2006 Genuine 2009 2008 Reinforcement Rail Bumper Rabbit Gti (31.2% similar) Item sells only one part, picture shows different angles. Volkswagen GTI rabbit 2009 genuine VW audi bumper rail item condition new part brand genuine VW audi part number 1K6807305 1K6 part bumper rail part notes...(February 18th, 2015)
- 23132467987 Audi Rear Bumper Cover Black Oem Quattro (42% similar) There are some signs of wear as can not be seen on the pictures, but tested and in good working condition. Please see pictures the item has issues - dents scratches...(July 11th, 2018)
