REDROCK 4X4 J104443 Stubby Front Bumper Bar Winch Wrangl 87-06

( Brand: Redrock 4x4 ), ( Manufacturer Part Number: J104443 ), ( Part Type: Bumper Bar Winch )

Review REDROCK 4X4 Jeep Stubby Front Bumper Bar Winch 87-06 Wrangl fits STINGER

The J104443 Jeep Redrock 4x4 Stubby Front Bumper Stinger Bar Winch is an exceptional upgrade for your 1987-2006 Wrangler. This sturdy bumper is not just a protective shield for your Jeep, but a bold statement of off-road readiness.

Crafted from high-quality steel, the bumper is designed to withstand the rigors of off-road adventures. It features a stubby design, which not only provides ample clearance for obstacles but also enhances your Jeep's approach angle. The bumper's stinger bar is a functional and aesthetic addition, providing a secure mounting point for your winch.

The bumper is specifically designed to accommodate a winch with a capacity of up to 8,000 lbs. This winch can be a lifesaver in tough situations, helping you pull your Jeep out of mud, sand, or other challenging terrains. The bumper comes with pre-drilled holes and mounting hardware, making installation a straightforward process.

The J104443 Jeep Redrock 4x4 Stubby Front Bumper Stinger Bar Winch is not just about functionality. Its black powder-coated finish not only provides corrosion resistance but also gives your Jeep a rugged, aggressive look that is sure to turn heads. It's the perfect blend of style and substance for your Wrangler.

In conclusion, the J104443 Jeep Redrock 4x4 Stubby Front Bumper Stinger Bar Winch is a must-have accessory for any serious off-road enthusiast. It provides the protection, functionality, and style your Jeep needs to conquer any terrain.

1. Enhanced protection: The bumper provides additional protection to the front of your Wrangler, especially during off-road driving or in case of accidents.

2. Increased towing capacity: The winch attached to the bumper can be used for towing or recovering vehicles, increasing your vehicle's versatility.

3. Aesthetic appeal: The stubby front bumper and stinger bar can give your Wrangler a more rugged and aggressive look, enhancing its overall appearance.

4. Durability: The bumper is made of high-quality steel, ensuring it can withstand harsh conditions and last for a long time.

1. Installation can be complex: Installing the bumper and winch may require some technical knowledge and tools, which could be a challenge for some DIY enthusiasts.

2. Cost: The bumper and winch can be quite expensive, and the installation process may require additional costs for parts and labor.

3. Weight: The bumper and winch can add significant weight to your Wrangler, affecting its performance and fuel efficiency.

The J104443 Jeep Redrock 4x4 Stubby Front Bumper Stinger Bar Winch is a great investment for Wrangler owners who frequently engage in off-road activities or need the added towing capacity. The bumper's durability and aesthetic appeal are also significant advantages. However, the complex installation process and expensive cost should be considered before making a purchase.

If you're considering buying this product, it's recommended to research and educate yourself about the installation process and to ensure you have the necessary tools and knowledge. Additionally, you may want to consider budgeting for any additional costs that may arise during installation. Ultimately, if the benefits outweigh the drawbacks for you, then this bumper and winch could be a valuable addition to your Wrangler.

Details:

Redrock 4x4 engineered their Stinger stubby front bumper to be a direct bolt-on replacement for the original stock reusing factory mounting points.

Installation can be completed in about two hours with just basic hand tools and the help of a friend. This Redrock 4x4 full width stubby front bumper with Stinger bar is designed for use on all Jeep wrangler J and Th model's including unlimited Rubicon.

Seeing that this stubby bumper is much shorter than a full width bumper, it won't block your front wheels when trying to navigate over larger obstructions found on the trail.

Features stubby front bumper Stinger bar design built-in winch plate for up to 12,000lb. This is an open box item.

No rings included. The d-ring mounts are welded on both inside and outside for extra strength.

Sold as picture. Heavy duty construction. There is no cutting or modifications required for a clean straight forward install.

If the does not match pictures there is most likely a mistake.

Redrock 4x4 stubby front bumper w Stinger bar - winch Jeep wrangler J Th fair condition. Prepare your Jeep wrangler for the hazards of off-Reading by upgrading to a Redrock 4x4 stubby front bumper with Stinger bar.

Winch high strength d-ring mounts heavy duty steel construction - 2 x. Winch and two high strength d-ring mounts, making this Redrock 4x4 stubby front bumper ideal for all off-road adventures.

Easy, bolt-on installation. Redrock 4x4 manufactures their stubby front bumper with Stinger bar from mild steel plating and 2 x 0.

Bumper has some scratches and scruff marks. Aftermarket pros.

This stubby bumper also features a built-in winch plate that is capable of supporting 12,000 lb.

specifications frontbumperus:

• for models: Stinger
• for makes: Jeep
• brand: Redrock 4x4
• mpn: J104443
• part type: Bumper Bar Winch

Seller frontbumperus:

• city: Malvern, Pennsylvania
• zipcode: 19355

General frontbumperus:

• Motors > PartsAccessories > CarTruck Parts > Exterior > Bumpers
• condition: Used
• in stock: Yes

Offer frontbumperus:

• Started: October 10, 2018, 12:53 pm
• bids: 0
• best offer: false
• Sold: 0
• quantity: 1

Payments frontbumperus:

• PayPal

Ratings:

1. item as described, thanks! 10-10-18
2. Great seller !!! Fast shipping !!!awesome product!!! 10-10-18
3. Thanks! 10-10-18
4. Excellent Seller, very honest and professional, Thankyou! 10-10-18
5. Always a Great seller fast shipping!! Thanks 10-10-18

Returns frontbumperus:

• paid by: Buyer
• policy: returns accepted
• time: 60 Days

Shipping frontbumperus:

• cost: $0.0
• type: Flat
• handling: 1 days

Redrock 4x4 J104443 Is Similar To:

• J104449 Redrock Approach Front Bumper Wrangler Jk (63.2% similar) If the does not match pictures there is most likely a mistake. This Redrock 4X4 approach front bumper is designed for use on all jeep wrangler JFK unlimited model's including the Rubicon. Aftermarket pros. Heavy duty construction tubing for superior strength and rigidity. Winch and two high strength...(July 9th, 2018)
• J104453 Redrock Flash Sale 4x4 (44.2% similar) This item may have scuffs, scrapes and dings, sold as is. Stubby front bumper stinger bar design built-in winch plate for up to 12,000LB. If the does not match pictures there is most likely a mistake. Flash sale-redrock 4X4 stubby front bumper w stinger bar - winch mount wrangler JFK sale only, good...(September 1st, 2017)
• J122317-jl Redrock Bull Bar Skid Plate Stainless Steel Wrangler Jl (42.7% similar) This Redrock 4X4 bull bar provides dependable front-end and under-engine protection from all types of off-road hazards, even on the toughest trails. All hardware for installation is included, making this an easy job anyone to complete. This bull bar is then completed in a bright, mirror polished ...(January 14th, 2019)
• Pw01968101 Redrock Hd Front Bumper Tacoma (52.8% similar) Direct bolt-on installation. If the does not match pictures there is most likely a mistake. This Redrock 4X4 HD front bumper was designed for use on the Toyota Tacoma model's. Installation can be completed in about 2 hours with just basic hand tools and the help of a friend. Redrock 4X4 engineered ...(December 27th, 2018)