JAGUAR 16-588 Siii Sii Xke Bumpers Placing Kit 1/2

( Manufacturer Part Number: 16-588 ), ( Part Type: Bumper ), ( Primary Color: Chromed ), ( Surface Finish: Chrome ), ( Triple Chrome Plating: 12 Ga. Steel )

Review JAGUAR Siii Sii Kit Complete Xke Type Bumpers Re placing On fits SI RE 1972–1974

The 16-588 SII/SI Kit from Jaguar Heritage is an essential tool for any Jaguar E-Type enthusiast or restoration specialist working on 1972 or 1974 models. This comprehensive kit includes all the necessary components for replacing the front and rear bumpers on these iconic vehicles.

The front bumper kit (part number 16-588-01) includes two new bumpers, complete with overriders, rubber seal strips, and all the necessary mounting hardware. The rear bumper kit (part number 16-588-02) also includes two new bumpers, along with rubber seal strips, overriders, and mounting hardware.

Each bumper is manufactured to exacting specifications using authentic Jaguar materials and techniques, ensuring a perfect fit and finish. The kits also include detailed installation instructions, making the replacement process as straightforward as possible.

The use of these replacement bumpers not only enhances the aesthetics of your E-Type but also helps to maintain its structural integrity. Over time, the original bumpers can become damaged or worn, leading to rust and other issues. By replacing them with these high-quality Jaguar Heritage kits, you can restore your vehicle to its former glory and extend its lifespan.

In summary, the 16-588 SII/SI Kit from Jaguar Heritage is an essential tool for anyone looking to replace the bumpers on their 1972 or 1974 Jaguar E-Type. Each kit includes everything you need for a professional-grade installation, ensuring a perfect fit and finish. By investing in this kit, you're not only enhancing the appearance of your E-Type but also protecting its structural integrity for years to come.

1. Improved Aesthetics: New bumpers can give your Jaguar a fresher look, making it stand out from other vintage E-types.

2. Enhanced Safety: The new bumpers may have improved safety features, such as increased crash protection, which can make your car safer to drive.

3. Better Fit and Finish: New bumpers are often manufactured to a higher standard of fit and finish than original parts, which can help reduce rattling and improve the overall appearance of the car.

4. Availability of Parts: New bumpers are easier to find and replace than original parts, which can save you time and money in the long run.

1. Cost: New bumpers can be expensive, especially if you choose to go with aftermarket parts.

2. Authenticity: Replacing original parts with new ones can detract from the car's historical value and authenticity.

3. Installation: Installing new bumpers can be a complex process, especially if you don't have experience working on classic cars.

Replacing the bumpers on your 1972-1974 E-type Jaguar SIII SI, SI, XKE can be a worthwhile investment if you prioritize safety, aesthetics, and ease of replacement over historical authenticity. However, it's important to consider the cost and potential complexity of the installation process before making a decision. If you're unsure about whether to replace your bumpers, it may be a good idea to consult with a professional restoration expert.

If you decide to replace the bumpers on your E-type Jaguar, it's recommended to choose OEM (Original Equipment Manufacturer) parts for the best fit and finish. However, if OEM parts are too expensive, aftermarket parts can be a viable alternative as long as they are of high quality and fit the car well. Regardless of the parts you choose, it's important to have the installation done by a professional to ensure that it's done correctly and safely.

Details:

Or accept bogus cashier's checks. Charges, on manufacturing defects. I also fabricated and installed a Reinforcement for the front bumper mount.

Because they will never look and fit like the brand new set. The Si the Si 1/2 kits include 11 brand new pieces 2 front bumper blades, 2 Rear bumper blades, 1 front motif bar, 2 f motif elbows 4 front Rear overrides I used inch steel square tube, fabricated as shown in pics, and installed as shown in pics Rear bumper this is a bolt on process.

Pic 11 shows the mounting bolt, and pics show the new bumper test mounted. Refer to pic 11 which shows the mounting bolt installed for Reference. The Sii kit includes 12 brand new pieces 2 front bumper blades, 2 front bumper overrides, 1 front motif bar, 2 Rear bumper blades, 2 Rear overrides, 1 Rear bumper and 2 Rear clam shells.

That i'm offering. Drill the mounting hole to accept a 3/8 bolt.

Also Remove the head lamp chrome finishers, the head lamp eyebrow, and then the head lamp sugar scoop. It is attached in the front at the same bolt as the front bumper mount, and in the Rear at the bonnet hinge bracket.

And while it is not a Simple bolt on project, it can be accomplished by the auto hobbyist home mechanic. I sure wish you did just Regular old chroming your quality is excellent.

An ox acetylene welder is necessary as well as normal hand tools. This one is from a customer that bought 3 complete sets of e type f r bumpers and overrides.

The new bumpers are test fitted in pic 4 the bolt holding the upper and lower strut bracing is Removed, as well as the bolts and bracket holding the upper strut to the bonnet, and then the upper strut is Removed along with its horizontal plate that fits in the bonnet seam held by two bolts. Many than.

This gives good access to the interior of the bonnet pic 2 is after Removal of the old bumpers, the grill, and the rubber blocks. And the outer piece Removed. Re placing 1972 bumpers on a 1974 xke this is a job that in my opinion will greatly enhance the appearance of the 1974 xke.

A drill press is desirable, as is a grinder and an air powered hack saw.

The front bumper mount bracket is fabricated from 1/8 inch steel and a 1 inch long 3/8 x 24 bolt. Your friend, Jorge servery original message from mike o'Rourke to Jorge servery subject parts arrived mucking Remarkable. Attention scammers.

Made out of 12 gauge sheet metal, to original specifications, with beautiful show quality triple chrome plating, guaranteed. Our Regular price is brand new Jaguar Si, Si 1 2, Sii or Siii '71 '72 early xke or e type complete front Rear bumper kit.

This is not the first time I have dealt with chrome bumpers but I can tell you for sure that this is the best quality I have ever seen. No fabrication Required. Front bumper the before look is shown in picture 1.

Pic 3 shows the rubber block Retainer hardware Removed. Mike o'Rourke. Jorge, bumpers arrived today and they are absolutely beautiful.

Pic 10 shows the front mount bracket in place view from inside the bonnet. The box I sent to you with the s3 used bumpers also arrived okay.

Nobody can come near our quality, service and prices. I opened up the pieces and your work is that of a true craftsman. This incredible price is a better deal than taking your 40 year old, banged up, rusted, old pieces to be straighten, stripped, welded, polished and Re chromed the completed bracket is shown in pic 6, which also shows the hole to mount the bracket inside the bonnet.

part #: 16588 price

• $100.00

specifications frontbumperus:

• for models: Si, Re
• for makes: Jaguar
• for years: 1972-1974
• mpn: 16-588
• part type: Bumper
• primary color: Chromed
• surface finish: Chrome
• triple chrome plating: 12 Ga. Steel

Ratings:

1. thx 06-03-16
2. Great product,Fast shipping.Thanks.A+++ 06-07-16
3. Great seller, great price, fast free shipping, thanks 06-07-16
4. Very nice part happy to get it A+ thanks 06-09-16
5. Excellent seller and a pleasure to do business with. Thank you! 06-14-16

General frontbumperus:

• condition: New
• Motors > Parts & Accessories > Car & Truck Parts > Exterior > Bumpers
• in stock: Yes

Returns frontbumperus:

• policy: Returns accepted
• paid by: Buyer
• details: FOR MANUFACTURING DEFECTS ONLY, EXCEPT FOR S&H + INS. BOTH WAYS, ANY OTHER RETURNS WILL BE ASSESED A 20% RE-STOCKING FEE.
• time: 14 Days
• type: Money Back

Payments frontbumperus:

• PayPal

Shipping frontbumperus:

• type: Calculated
• handling: 1 days

Offer frontbumperus:

• # bids: 0
• best offer: false
• # Sold: 0
• min. bid: $1,999.95
• quantity: 1
• : true
• Started: June 17, 2016, 6:08 pm

Seller frontbumperus:

• zipcode: 91911
• city: Chula Vista, California

Jaguar 16-588 Is Similar To:

• 02xr87632 Jaguar S Type Front (34.7% similar) Phone: recent additions. Unless stated otherwise all our body parts are used and may have some damage, scuffs scratches. Please compare this item with yours before buying also do your research to make sure will fit vehicle part number must match...(August 17th, 2017)
• 129661sw Type 00 01 02 03 04 05 06 07 08 Jaguar S Rear Bumper Reinf (36.8% similar) Jaguar type rear bumper rein 129661SW warranty 90 day parts only warranty no labor. If an item arrives damaged, please via message within 24 hours for instructions. No expedited shipping is available...(November 21st, 2015)
• 2r83-17c831 Jaguar S Type Front (36% similar) Taken from a 2005 jaguar s-type. Great condition, normal wear and tear...(October 24th, 2017)
• 34630 Gray White Type 04 Bumper Jaguar Cover Rear Trim (22.8% similar) ...(September 21st, 2014)
• 4r83-17d781a Jaguar S-type Rear Bumper (43% similar) Please compare this item with yours before buying also do your research to make sure will fit vehicle part number must match. Unless stated otherwise all our body parts are used and may have some damage, scuffs scratches. Phone: recent additions. Jaguar s-type rear bumper 2008 S type white 4R83-...(September 10th, 2017)
• 4r83-17e911-a Jaguar Type Center Rear Bumper Chrome Molding Oem (45.5% similar) Everything is selling as. Better for you to own it then see the car go scrap metal. Have a question. Please with part numbers of your interest...(July 13th, 2018)
• 5323 Amco Jaguar Xke E-type Roadster Luggage Rack Nos (44.3% similar) Syracuse NY 2187 please view my other listings. New old stock jaguar xke e type roadster Amoco luggage rack excellent condition all the parts and instructions for installation are included this Amoco rack was actually an aftermarket item that many jaguar dealers and distributors sold and installed ...(May 8th, 2016)
• Bd189471 Uro Parts Bumper Seal Fits Jaguar Xke 847603002655 (23.4% similar) That section provides detailed information about the part and compatible vehicles. All parts come with a 1-YEAR warranty and 30-DAY return period...(November 17th, 2018)
• C20240 Type 02 03 Jaguar X Front Bumper Assy W Headlamp Washers From Vin 34424 (35.4% similar) ...(November 18th, 2015)
• Absorber Jaguar Impact type Foam 04-08 C2s25897 Bumper-bumper Oem (44.4% similar) Export shipping is always discounted whether it is by federal express, DHL or ups. Orders are shipped out daily by us. DHL, or ups. Please for all of your British car needs...(December 6th, 2014)
• Panel-valance C2s40956 type-nose Jaguar Oem Panel 02-08 (24% similar) ...(March 7th, 2015)